Brake Pedal - Honda CRF50F 2004-2015 Service Manual

INSTALLATION
Install the drive chain slider and tighten the nut t o
the specified torque.
TORQUE: 12 N 'm (1 .2 kgf·m, 9 Ibf.ft)
Install the swingarm over the frame, then install the
pivot bolt from the right side and the shock
absorber lower mounting bolt from the left side.
Apply grease to the seating surface of the swing arm
pivot nut.
Install and tighten the swing arm pivot nul to the
specified torque.
TORQUE: 39 N 'm 14.0 kgf·m, 29 IbUtl
Tighten the shock absorber lower mounting nut to
the specified torque.
TORQUE: 34 N 'm (3 .5 kgf'm,25 Ibf.ftJ
Install the drive chain guard and tighten the bolts.
Install the drive chain cover and lighten the bolts.
Install the rear wheel (page 13-9),
Install the d rive chain (page 3· 15) .
BRAKE PEDAL
REMOVAL
Remove the rear brake adjusting nut and disconnect
the rear brake rod from the brake ar m, and remove
the joint pin and spring.
REAR WHEEL/BRAKE/SUSPENSION
CHAIN SLIDER
13-15