Honda CRF50F 2004-2015 Service Manual page 122

CLUTCH/GEARSHIFT LINKAGE
9-18
INSPECTION
Check the gearshift spindle for bends or other dam-
age.
INSTALLATION
Install the four gearshift drum pins and two dowel
pins.
Install the cam plate by aligning the pin hole with
~
the dowel pins and aligning the drum pin with the
denl.
Install the cam plate and tighten the bolt to the spec-
ified torque.
TORQUE: 17 N'm (1.7 kgf·m.12 Ibf.ft)
InSlall the gearshift spindle into the crankcase by
aligning the return spring ends with the spring pin
w hile pushing down the gearshift arm and set the
gearshift arm to the shift drum pins.