Gearshift Linkage - Honda CRF50F 2004-2015 Service Manual

CLUTCH/GEARSHIFT LINKAGE
Install the clutch outer and tighten the screws to the
specified torque.
TORQU E: 4.4 N'm (0.45 kgf-m.3.3 Ibf.ttl
Install the clutch lifter cam plate.
Install the oillh rough spring and oillhrough .
Install the spring, ball retainer and clutch lifter lever.
Install the right crank case cover (page 9- 19).
GEARSHIFT LINKAGE
REMOVAL
Remove the clutch and primary driven gear (page 9-
6).
Clean
the
gearshift
Remove the pinch bolt and gearshift pedal.
spmdle end
/0
pre.-
vent din from amm-
mg rhe crankcase
9-16
G.,\RSHFTPEDAL