Honda CRF50F 2004-2015 Service Manual page 113

Remove the four damper springs.
Remove the four screws and plain washers.
Remove the drive plate assembly and clutch
springs.
Remove the clutch weight stopper ring.
Remove the clutch weight/center ring.
INSPECTION
Clutch lifter beari ng
Turn the inner race of the litter bearing with your
finger.
The bearing should turn smoothly and freely with-
out excessive play.
Also check that the bearing fits tightly in the clutch
outer cover.
Replace the bearing if necessary.
CLUTCH / GEARSHIFT LINKAGE
SCREWS! WASHERS
DRIVE PLATE ASSEMBLY
CllJTCHWEIGHT/CENTER RING
STC)P';"R R)NG
BEARING
9-9