Drive Chain Slider; Brake Shoe Wear - Honda CRF50F 2004-2015 Service Manual

Installing a new chai n on badly worn sprockets w i ll
cause the new chain to wear quickly.
Inspect the drive and driven sprocket teeth for wear
or damage. Replace if necessary.
Never use a new d rive chain on worn sprockets.
Both chain and sprockets must be in good condi-
tion, or the new replacement parts will wear rapidly.
Check the attaching bolts and nuts on the drive and
driven sprockets.
If any are loose, torque them.
Install t he drive chain onto the sprockets.
Install t he master link and link plate.
Install t he retaining clip so that its open end is oppo-
site the normal rotation of the chain .
DRIVE CHAIN SLIDER
Check the drive chain slider for wea r or damage.
Replace the drive cha i n slider
if
the wear limi t guide
lug is worn out or it has been damaged.
BRAKE SHOE WEAR
Check t he brake shoes and brake drum if the arrow
on the indicator plat e aligns with the
H
6. "
mark on
the brake panel when the brake lever is appl ied.
Refer to page 12-13 or page 13- 10 for brake shoe
and brake drum inspection.
MAINTENANCE
NORMAL
MASTER LINK
CLIP
GUIDE lUG
3-15