Honda CRF50F 2004-2015 Service Manual page 179

DISASSEMBLY
Remove the nut s, bolts and driven sprocket.
Remove the left dust seal.
Wheel bearing remova l
Install the bearing remover head into the bearing.
From the opposite side install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive OUI the other
bearing.
TOOLS:
Bearing remover head, 12 mm 07746·0050300
Bearing rem over shaft 07746-0050100
ASSEMBLY
DISTANCE COLLAR
BEARING (620 1 U)
32 N'm (3.3 kgf·m, 24 Ibf.ft)
REAR WHEEl/BRAKE/SUSPENSION
BEARING (6201 U)
DUST SEAL ....-..
DRIVEN SPROCKET ' B O L T S
13-7