Honda CRF50F 2004-2015 Service Manual page 166

FORK
FRONT WHEEL / BRAKE/SUSPENSION/ STEERING
Install the brake arm by aligning the punch marks
on the arm and brake cam.
Install a new brake arm pinch bolt and nut as shown
and tighten
it
to the specified torque.
TORQUE: 5.9 N 'm (0.6 kgf-m , 4.3 Ibf.ftl
Apply grease to the anchor pin and brake cam slid-
ing surfaces.
Install the brake shoes and spring as shown.
Wipe any excess grease of the brake cam and
anchor pin.
INSTALLATION
Install the front wheel (page 12-11)
DISASSEMBLY
Remove the front wheel (page 12-8),
Loosen the brake cable nul and remove the brake
cable from the fork slider.
Remove the dust seal from the fork ou ter tube by
sliding it down.
Remove the stopper ring.
Remove the fork top bolt and washer and pull the
fork slider down to remove the fork assembly.
NUT
12-15