Operation Panel - Ricoh Jupiter-C1 Technical Bulletin

th
Updated: 30
Model:
Jupiter-C1

4. Operation Panel

Subject
Access The Access Code
Code dialogue box remains
dialogue displayed after pushing
box the Scanner button on the
MFP if the Partial Access
Code settings are not
completed.
Some "Near End" messages for
messages oil and waste toner are
not only displayed when the
displayed display language is
English or Japanese.
'Tray full' The Tray Full error
not message is not displayed
displayed when the destination
output
tray has reached capacity.
Toner near- When the machine was
end is not used for a long time
displayed
but there is
toner in the
cartridge
"Add paper
to Tray 1
(2)" shows
but there is
paper in
paper tray 1
(2).
"Oil Near Swedish, Web Image
Full" shown Monitor
instead of
"Oil Near
End"
T
echnical
December 2007: Changes in bold italics
Symptom RTB #
019
003b
013
029
030
003d
B
ulletin
Date:
15-Sep-04
Cause
Scanner Install the latest scanner
firmware firmware (ver. 2.03 or later)
System Install the latest system
firmware firmware (ver. 1.19 or later)
Netfile Install the latest Netfile
firmware firmware (ver. 1.02 or later)
Insufficient Remove the toner cartridge
toner agitation from the machine and shake
it from side to side 5 to 6
times. Then put it back in the
machine.
Worn or Attach a special piece of tape
defective parts or replace the tray holder.
in the paper
tray holder.
System Install the latest system
firmware firmware (ver. 1.21 or later)
PAGE: 6/12
No.:
RB149000h
Solution
See RTB
30 for
details
Note