Printing The Current Configuration - IBM 6400 Setup Manual

Printing the Current Configuration

Before you begin changing parameter values for the printer, you may wish to
print out a record of the current configuration, including any active values
that you have recently modified. If you have not changed any parameter
settings, the current configuration is the factory default configuration.
There are two methods for printing the current configuration: the first
method is to press the Printer Configuration key, as shown in the following
procedure.
Step Key
1.
Make sure the printer is on.
2.
Press:
Stop
3.
Printer Con–
figuration
4.
Start
5.
Start
The second method for printing the current configuration, as well as several
other configurations, is to use the Print Custom Set Values menu option,
shown on the following page.
3–8 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models
Result
NOT READY
PRESS START TO PRINT
PRESS STOP TO EXIT
NOT READY
READY
Notes
The printer must be in
NOT READY mode to print
the configuration.
You are prompted to press the
Start key before the
configuration prints.
Indicates that the
configuration has printed.
Date and store the printout in
a safe place. You may also
want to label the printout
(e.g. "Configuration for 2-up
Labels").
The printer is READY for
normal operation.