Select Sfcc; Power On ^X; Power On ^F; Power On ^Py - IBM 6400 Setup Manual

Select SFCC

Selects the Special Function Control Character. Valid values are 11 (hex)
through FF (hex). The default value is 5E (hex). Always use the SFCC
required for your configuration wherever the circumflex, or (cc) is shown.
Obtain a configuration printout to determine the currently selected SFCC.

Power On ^X

Selects the ignore mode power up condition. Refer to the 6400 Code V
User's Manual for more information.
Disable. The default. Does not select the ignore mode as the power–up
default.
Enable. Selects the ignore mode as the power–up default, and selects the
graphics mode (cc)PY as the power–up default. All characters are
ignored until a (cc)A command is received.

Power On ^F

Enable Free format causes the Code V to ignore carriage returns, line feeds
and all characters below 20 hex sent from the host. Refer to the
6400 Code V User's Manual for more information on Free Format.
Disable. The default. Does not select free format as the power–up
default.
Enable. Selects free format as the power–up default, and selects the
graphics mode (cc)PY as the power–up default.

Power On ^PY

Selects the graphics mode power up condition. Refer to the 6400 Code V
User's Manual for more information.
Disable. The default. Does not select the graphics mode (cc)PY as the
power–up default.
Enable. Selects the graphics mode (cc)PY as the power–up default.
E–6 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models