Control Code 06 - IBM 6400 Setup Manual

Control Code 06

This option will select alternate line spacing. When the printer receives a hex
06 command, the line spacing will change to spacing specified in this option
for the current line only.
8.0 LPI (the default)
10.3 LPI
6.0 LPI
Control Code 08
This option determines the action to take when a hex 08 command is
received.
ELONGATED (the default) prints double high characters for the
current line.
BACKSPACE moves the current print position one space to the left
unless the printer is currently at print position 1.
Define CR Code
The DEFINE CR CODE (Define Carriage Return Code) option controls the
action of the printer when it receives a Carriage Return code (ØD hex) from
the host computer. If this feature is enabled, each time the printer receives a
Carriage Return, it inserts an additional Line Feed code (ØA hex) into the
data stream. Do not use this feature if the host computer sends Line Feeds to
the printer.
CR = CR (the default) does not insert an extra Line Feed after each
Carriage Return.
CR = CR + LF inserts an extra Line Feed after each Carriage Return. The
next print position will be print position 1 of the next line.
Auto LF
The AUTO LF (Auto Line Feed) option defines the printer actions when
print data is received past the forms width setting.
DISABLE (the default) discards any data past the forms width.
ENABLE performs an automatic carriage return and line feed when data
is received past the forms width.
4–70 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models