Registration From The Phone's Menu; Configuring Ip Settings; Assigning A Local Ip Address - Altigen 705 User Manual

Setting
GateKeeper
Network >
Discovery
GK Discovery
Network >
NAT Address
NAT Address

Registration from the Phone's Menu

Under normal circumstances, the IP 705 phone registers itself
automatically. However, if registration failed for some reason (for
example, the server was not available), registration can be started again
from the IP 705 phone's menu:
1. Press the Menu button.
2. Scroll to REGISTER.
3. Press the Enter button.

Configuring IP Settings

An IP address is a unique logical address that identifies each host computer
on a TCP/IP network. An IP address is a 32-bit number expressed as four
decimal numbers from 0 to 255, separated by periods.
Use these guidelines when manually entering the IP settings:
• Ensure the default gateway IP address is on the same subnet as the host
IP address. Check with your system administrator.
• When inputting IP addresses into the IP 705, use the * key to enter
periods. For example, 209.120.12.8 would be input as 209*120*12*8.

Assigning a Local IP Address

To assign an IP address, use the following steps:
1. Ensure that DHCP is disabled.
2. Press the Menu button, scroll to NETWORK, then press the Enter
button.
3. Scroll to LOCAL ADDRESS, and press Enter.
20 IP 705 Manual
Menu Path Description
Sets whether GateKeeper discovery is
enabled. IP phone will automatically
find GateKeeper. Shows only if
GateKeeper is enabled.
Sets the NAT server's public IP
address.