Altigen 705 User Manual page 17

Feature
Shows the history of
Call Log
incoming calls, up to 99.
Allows a programmable
Call Record key to be used for on-
demand recording.
Initiates a conference and
Conference
adds in other parties one at
button
a time.
Displays the workgroup
Workgroup status in the LCD when
Status you press the Down
arrow.
Signals PBX that special
Flash button
instructions will follow.
The system administrator
can configure a key as a
Headset key. When
Headset
pressed, the user will be
able to activate the RJ-9
headset port.
Description
The IP 705 Phone
Notes
•
Pressing the Enter button will
dial the number displayed. If 20
seconds pass without any input,
the phone exits the Call Log.
•
Must be enabled by the system
administrator.
•
User presses the key to start
recording, presses the key again
to stop recording. There is no
pause function. When the call is
recording, the light is on.
•
Recorded conversations can then
be played back through voice
mail or accessed at a centralized
location.
•
Single Call Waiting, Multiple
Call Waiting or Live Call
Waiting must be enabled for the
extension by the system
administrator or in AltiView/
AltiAgent in order to add
incoming calls to a conference.
•
The user who initiates the
conference call can select another
conference member's call and
drop it from the conference by
disconnecting the call. The
feature is unavailable to all other
conference members, even when
the conference initiator hangs up.
•
The system administrator must
have configured workgroup status
display for your phone.
•
This button is used as a hook
switch for headset ports.
IP 705 Manual 9