Altigen 705 User Manual page 18

Feature
Hold button
Line Park
Mute button
Program Keys
Redial button
10 IP 705 Manual
Description
Places an active call on
hold.
A parked call line
appearance can be
assigned as a
programmable Line Park
key by the administrator.
When connected to a
caller, the call can be
parked by pressing the
Line Park key. If a call is
parked at a Line Park line,
the button's light is on.
The call can be picked up
by pressing the Line Park
key.
While on a call, mutes
conversation.
Lets you associate a
programmable key with a
speed dial number or
feature code directly from
the IP phone.
Redials a selected number
from the last16 numbers
dialed.
Notes
•
When Multiple Call Waiting is
enabled at the extension, the user
can put multiple incoming calls
on hold and retrieve using the
phone's /buttons and Enter
button.
•
Pressing Hold while onhook will
retrieve the last hold call.
•
Supports up to 9 hold calls.
•
When configured by the
administrator, the IP phone can
play an audible beep or one of
several different ring tones when
a call is parked.
•
When configured by the
administrator, an alternate way to
pick up a parked call is to use #51
<line number> if Line Park is not
assigned to a programmable key.
•
The Line Park key's light will be
lit and turns off when the parked
call is picked up, the caller hangs
up, or the call is routed to IVR/
Auto Attendant.
•
If the system administrator has
allowed it, you can associate
certain programmable keys with a
speed dial number or feature code
from the IP phone menu.
•
Pressing Enter dials the number
displayed.
•
Redials up to 32 digits.
•
When a new call comes in, the
phone will exit this menu and go
to ring state. If in this menu for
longer than 20 seconds without
any input, the phone exits this
menu.