Kohler Command PRO CS Service Manual page 131

Figure 11-6. CS4, CS6. Installing Hitch Pin.
Figure 11-7. CS8.5-12. Installing Hitch Pin.
Install Crankshaft
1. Carefully slide the flywheel end of the crankshaft
through the main ball bearing and seal.
Figure 11-8. Installing Crankshaft.
Install Connecting Rod with Piston and
Rings
1. If the piston and/or connecting rod has been
changed or removed, make sure the following is
correct before installing.
Figure 11-9.
a. The locating mark on piston is down. See
Figure 11-10.
Figure 11-10. Piston Installation Details.
Section 11
Reassembly
11
11.3