Menu Structure; Automatic - ProLights LUMIPAR7QPRO User Manual

8

3.3 MENU STRUCTURE

MAIN FUNCTION
DMX Address
Personality
Master/Slave
Show Md <Sh1 - Sh5>
Show mode
Show Md <MaunC>
Dimming Curve
Backlight
Test
Info
STANDALONE
This fixture has several options for operating without a DMX controller. Access these options via the con-
trol panel on the back of the fixture.

3.4 AUTOMATIC

This fixture has preprogrammed chases that may be triggered without a controller. Access these chases
via the control panel on the back of the fixture.
• Remove any DMX controller from the fixture.
• Press the button MENU so many times until shows [Show Md], and press the button ENTER to confirm.
• Select the program [Sh 1 - Sh 5] through the buttons UP/DOWN. Press the button ENTER to confirm.
• Select the desired run speed (slow~fast), through the buttons UP/DOWN [Speed 000 - Speed 100].
• Press the button ENTER to save the setting.
LUMIPAR 7QPRO
SELECTION
Addr
Channel
M&S Md
Speed 000 - 100
R-G-B-W-GB-RB-RG-
Show Md <Fix c>
-RGB-RW-GW-BW-
RGW-RBW-GBW-RGBW
Dimme Md
Back L
Auto Test
Fixture
Version
SUB-SELECTION
001 - 512
10 - channel operating mode: Dimmer, RGBW, macro, strobe,
10CH
6CH 6- channel operating mode: RGBW color mixing with dimmer
4CH 4 - channel operating mode: RGBW color mixing
Master
Slaver
R000 - R255
G000 - G255
B000 - B255
W000 - W255
OFF
Mode 1
Mode 2
Mode 3
ALL
10 S
20 S
30 S
0001h
V1.0
DESCRIPTION
DMX starting address selection
auto, auto speed, dimmer curve
Master/Slave mode
Program selection, Run speed
Preset color
Red
Green
Blue
White
Dimmer off
Dimming curve: dim1 (fast)
Dimming curve: dim2
Dimming curve: dim3 (slow)
Backlight display
Auto test
Fixture use time
Info version default