Functions And Settings; Operation; Basic - ProLights LUMIPAR7QPRO User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LCD Display
(fig.3).
MENU
Used to access the menu or
to return a previous menu
MX IN
option
MENU
UP
Navigates downwards
through the menu list and
DMX OUT
increases the numeric value
when in a function
LUMIPAR 7QPRO
UP DOWN ENTER
FUSE: T 2A, 240V
Navigates upwards through
the menu list and decreases
the numeric value when in a
function
DOWN
Used to select and store the
current menu or confirm the
current function value or
POWER IN:
option within a menu
100~240V AC, 50/60Hz
7
Fig.3
ENTER
POWER