1. MOVING HEAD
2. ROTARY ARM
3. HANDLE
4. LED DMX
5. LCD DISPLAY
6. LED SLAVE
7. LED MASTER
8. MENU button: scroll through the main menu
or exits from the current submenu.
9. DOWN button: scroll 'down' through the
menu list or decrease the value of the current
function.
10. UP button: scroll 'up' through the menu list or
increase the value of the current function.
11. ENTER button: enter the currently selected
menu or confirm the current function value.
12. LED SOUND
13. POWER IN mains plug for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable. The support for he mains fuse is
located near the mains plug. Only replace a
blown fuse by one of the same type (T6.3A).
ELFIN FC/VW
14. POWER OUT
15. 5 pin connector for wireless control
16. DMX OUT ( 3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
17. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
18. Connection Jack for the remote control EC800
19. REMOTE CONTROL EC800 (optional) (fig.4)
20. Button STAND BY for the function Blackout
21. Button FUNCTION
22. Button MODE:
- Mode Sound (LED off )
- Mode Show (LED on)
- Mode speed (LED blinking)
NOTE - For operation via the remote control, no
DMX signal must be present at the input DMX IN.
7