Disassembly (Level1~Level2) - Motorola D10 Service Manual

BenQ
Introduction
esponsible care should be taken during the disassembly and
R
reassembly of the units in order to avoid damaging or stressing the
housing and internal components. Ensure that a properly grounded
high impedance conductive wrist strap is used while performing these
procedures on electronic units.
NOTE Many of the integrated circuit devices used in this
equipment are vulnerable to damage from static charges. Ensure
that adequate static protection is in place when handling, shipping,
and servicing the internal components of this equipment.
Recommended Tools
The following tools (or similar tools with the same functions) are
recommended for use during the disassembly and reassembly of the
phone.
Anti-Static Mat (Ground Cord included)
¡ E
Anti-Static Wrist Strap
¡ E
Torque Screw Driver (T5 type, torque is set to 1.2kg-cm)
¡ E
Tweezers
¡ E
Disassembly
83
Rev 1.0