Disassembly; Removing And Replacing The Battery Door And Battery - Motorola V600 Service Manual

Digital wireless telephone level 1 and 2 service manual

Hide thumbs Also See for V600:

Table of Contents

Disassembly

The procedures in this section provide instructions for the disassembly of V600

telephones. Tools and equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in this equipment are vulnerable to damage

from electrostatic discharge (ESD). Ensure adequate static protection is in place

when handling, shipping, and servicing the internal components of this equipment.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury such as burns if a

conductive material such as jewelry, keys, or beaded chains touch exposed terminals.

The conductive material may complete an electrical circuit (short circuit) and

become quite hot. Exercise care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Press in and hold the battery door latch as shown in Figure 1.

Figure 1. Removing the battery door

Slide the battery cover and lift it completely off the phone.

October 10, 2003

Battery Cover

V600

Battery Cover Latch

031565o

6809468A79-O

Table of Contents