Motorola D10 Service Manual page 122

BenQ
AGC, ADC, and APC can be calibrated separately.
APC+ARC
AGC+APC
AGC+APC+ARC
AGC+APC+ARC+ADC
If your calibration instrument can't support ramping calibration, we
support Set Ramping default to set the ramping table to optimal
default value.
F. E2p Clone:
"E2p Clone" is used for duplicating the data in the handset's
EEPROM. It backup the Network-Lock, handset-feature settings, and
phone book records to PC and enable users to restore them to
handsets latter. The procedure to Read/Write FlexOption is:
(1)Set baud rate 115200 and select com port then connect RS232
communication.
(2)Turn on the handset.
(3)Checks the database files are the same as software version. You
can assign database file from menu "File"
You can verify software version by keypress "*#300#" in handset.
(4)Select the e2p backup file and phonebook backup file.
(5) Click "Backup" to backup e2p and phonebook from handset to
file.
(6) Click "Restore" to restore e2p and phonebook from file to
handset.
"Set Database File".
81
Rev 1.0