Disassembly
Disassembly
Removing and Replacing the Battery Door
18
This section describes how to disassemble an MPx220 smartphone. Tools and equipment used
are listed in Table 1, preceding.
Many of the integrated devices used in this phone are vulnerable to damage from electrostatic
discharge (ESD). Ensure adequate static protection is in place when handling, shipping, and
servicing any internal components.
Avoid stressing the plastic in any way to avoid damage to either the plastic or internal
components.
1.
Ensure the phone is turned off.
2.
Remove the battery door by pressing the latch and sliding the battery door right and away
from the phone as shown in Figure 4.
Figure 4. Removing the Battery Door
December 22, 2004
MPx220
Latch