Removing And Replacing The Microphone - Motorola D10 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Microphone

G
6809464A58
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery, SIM, rear housing, and transceiver board as described in
the procedures
Microphone
Figure 14. Removing the Microphone
2. Using the plastic tweezers, carefully push the microphone assembly from its
socket on the transceiver board. The microphone assembly should come out of
its socket easily. See Figure 14.
3. To replace, insert the microphone into the upper end so the
terminals on the bottom of the microphone will contact the circuit board when
assembled. Ensure the microphone is straight and pushed completely into the
microphone socket.
➧
The microphone assembly is keyed to fit the microphone socket only one way. Be
sure the opening in the microphone grommet is positioned to face the opening in
the housing when reassembled.
4. Replace the transceiver board, rear housing, SIM, and battery as described in
the procedures.
.
May 20, 2003
Disassembly
Upper Endo
010710-o
29