BenQ
Introduction :
This document describes all the functions in service DMtool.
System requirements and setup :
¡ µ
A. Minimum requirement:
Operation system:
CPU:
Hard Disk:
Memory:
Input Device:
B. Calibration requirement:
1.Instrument for calibration Hp8922M GSM/DCS/PCS MS Test Set
2.GPIB interface card and cable For RF calibration
3.Power Supplies:
HpE3631,Hp66332A,Hp66311,Hp66111,Hp66309
4.Communication cables
5.RF Cable
6.Dummy battery
C. Setup in Windows:
In Windows 95/98/NT/2000, extract the Dmtool compress files to
any temporary directory. It will create DISK1 this subdirectory. Please
go into the DISK1 and double click the setup.exe. The Install shield
will auto setup the Dmtool in your operating system.
Some necessary files are listed below :
Download
Win95/ Win98 / WinNT / Win2000.
Pentium 233 Mhz or higher.
Free 10MB space.
64MB RAM.
Keyboard and mouse
Hp8960 GSM/DCS/PCS RF Interface
Rs232 and Acer Downloader
50 ohm cable for RF calibration.
For RF and battery calibration.
73
Rev 1.0