Removing The Cover - IBM A50 User Manual

Removing the cover

To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Remove the two screws at the rear of the left side cover and slide the cover to
34
User Guide
Important
Read "Important safety information" on page v and "Handling
static-sensitive devices" on page 29 before removing the cover.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
the rear to remove.