Identifying Security Locks; Rope Clip - IBM A50 User Manual

Identifying security locks

The following illustration shows the locations of the security features on the rear of
the computer.

Rope clip

Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel
security cable, and a padlock can secure your computer to a desk, table, or other
non-permanent fixture. For computers designed to accommodate the rope clip,
knockouts at the rear of the chassis are provided.
To install a rope clip:
1. Remove the cover. See "Removing the cover" on page 34.
2. Use a tool, such as a screwdriver, to remove the two metal knockouts.
3. Insert the rope clip through the rear panel; then attach and tighten the nuts
4. Replace the computer cover. For more information, see "Replacing the cover
44
User Guide
1 Rope clip
2 Integrated cable lock
3 Padlock loop
with an appropriately sized or adjustable wrench.
and connecting the cables" on page 48.