View Network Information - Overland Storage SnapServer Administrator's Manual

SnapServer/GuardianOS 7.5 Administrator's Guide
•
SNMP Configuration
•
Web Access
•
iSNS Configuration
IMPORTANT: The default settings enable access to the SnapServer via all protocols supported
by the SnapServer. As a security measure, disable any protocols not in use. For example, if no
Mac or FTP clients need access to the SnapServer, disable these protocols in the Web Management
Interface.

View Network Information

Browse to Network > (Network) Information to access the Network Information page that
displays the server's current network settings. One column appears for each Ethernet port in
use.
Field definitions for the Network Information page are given in the following table:
10400541-001
Ethernet Interface Information
Port Name
Enabled
TCP/IP Mode
IP Address
©2008-14 Overland Storage, Inc.
The names of the Ethernet interfaces.
Yes or No.
DHCP or Static.
The unique 32-bit value that identifies the server on a
network subnet.
3 - Network Settings
33
