SnapServer/GuardianOS 7.5 Administrator's Guide
Edit an iSCSI Disk
NOTE: You cannot edit an iSCSI disk if an initiator is connected. The hostname and IQN name of all
After disconnecting all client initiators, click the iSCSI disk name in the table on the iSCSI
main page to display the iSCSI Disk Properties page.
On this page, you can:
• Increase (but not decrease) the size of the iSCSI disk (if space remains).
• Enable or disable the write cache.
• Enable or disable support for multiple initiators.
• Enable or disable the CHAP logon.
Click OK to accept the changes (or Close to cancel).
CAUTION:
responsibility of the file and operating systems on the iSCSI client used to format and manage
the disk. Growing an iSCSI disk is handled differently by different operating systems and may lead to
unexpected results on some client types.
Delete an iSCSI Disk
NOTE: You cannot delete an iSCSI disk if an initiator is connected. The hostname and IQN name of
10400541-001
connected initiators are displayed in the table.
The consistency of the internal filesystem on the iSCSI disk is primarily the
all connected initiators are displayed in the table.
©2008-14 Overland Storage, Inc.
6 - Other Storage Options
124