Overland Storage SnapServer Administrator's Manual page 36

SnapServer/GuardianOS 7.5 Administrator's Guide
Disable SSH
SSH is enabled by default. To disable SSH, at the SSH page, uncheck the Enable SSH box, and
click OK .
Connect to the CLI using SSH
1. Verify that your remote machine has an SSH client application installed.
Free or low-cost SSH applications are available from the Internet.
2. Connect to the server using its IP address.
Before the Initial Setup Wizard is completed and storage is configured, SnapCLI
disables and hides all standard commands and makes only the system command
available. See
3. Log in as admin .
NOTE: SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is
You will automatically be placed in the CLI shell.
10400541-001
Before You Begin
configured to connect via SSH v2.
©2008-14 Overland Storage, Inc.
in Appendix E.
2 - Server Setup and Options

26