Overland Storage SnapServer Administrator's Manual page 79

SnapServer/GuardianOS 7.5 Administrator's Guide
2. At the Create Storage Pool page:
• Select the desired parity mode from the options provided.
• From the drop-down list, choose the percentage of storage pool space reserved for
3. Click Create Storage Pool .
4. At the confirmation page, verify your selections and, if everything is correct, click Create
Storage Pool
If any disk in a storage pool has previously been used in a different system, a warning
appears that it will be reformatted and all data on the disk will be deleted.
If any disk has size characteristics that are incompatible with the other disks in a
storage pool, a message appears that this disk will not be used.
While a storage pool is being created, progress is shown in the Status column.
5. When a storage pool has been successfully created, click OK to continue.
10400541-001
the snapshot.
again. (To make changes, click Cancel .)
©2008-14 Overland Storage, Inc.
4 - DynamicRAID Storage
69
