Setup Completion - Overland Storage SnapServer Administrator's Manual

SnapServer/GuardianOS 7.5 Administrator's Guide

Setup Completion

Once the head unit and all the DynamicRAID expansion units are configured, the Initial Setup
- Complete
1. Click OK to finish the setup process.
Storage Pools will be synchronizing in the background. You can still access your data
while this is occurring, however performance will be reduced until the synchronization
is complete.
2. If you have changed the server name, you will be prompted to restart. Click Restart to
continue.
The server will restart and your browser will automatically reconnect to the server.
Log in again when prompted to do so.
3. You are prompted to register your system.
It is important that you register your system to activate the warranty coverage. Proceed
to the
10400541-001
page is shown:
Registration Page on page
©2008-14 Overland Storage, Inc.
19.
2 - Server Setup and Options

18