Overland Storage SnapServer Administrator's Manual page 32

SnapServer/GuardianOS 7.5 Administrator's Guide
Snapshots should be taken when the system is idle or under low data traffic. To modify the
space available for storing snapshots:
• For DynamicRAID mode, go to Storage > Storage Pools and click the storage pool name
(Storage Pool Properties
• For Traditional RAID mode, go to Storage > Snapshots > Snapshot Space
on
Set up antivirus protection by clicking the SnapExtensions icon (
Antivirus
appears, click it to launch the administration user interface for configuration and scheduling
of virus scans and virus signature file updates.
Create a disaster recovery image on the Maintenance > Disaster Recovery page. This image
should be created after the server configuration is complete, and can be used to recover the
server or a replacement server to the configured state. See
detailed information on creating and using disaster recovery images.
GuardianOS contains built-in support for Snap EDR (trial mode) to synchronize and back up
to and from other SnapServers. GuardianOS also supports several third-party backup agents.
For information on using these backup methods to help protect your data, see
Solutions
10400541-001
on
page 66) .
. Click the checkbox to enable antivirus, and click OK . When the configuration link
in Appendix B.
©2008-14 Overland Storage, Inc.
page 70).
2 - Server Setup and Options
(Storage Pools
), and then clicking CA
Disaster Recovery in Chapter 9
Backup
for
22
