Deleting A Bond - Overland Storage SnapServer Administrator's Manual

SnapServer/GuardianOS 7.5 Administrator's Guide

Deleting a Bond

On a SnapServer with an existing bond, the bond can be deleted as follows:
1. At the TCP/IP Networking page, click the bond name in the table to view the properties
page.
2. Click Delete Bond .
The TCP/IP Networking page is displayed showing the details of the unbonded ports.
3. Click OK to save the changes.
10400541-001
The changes made require restarting the server's network. Restarting the
CAUTION:
server's network will disconnect all connected clients.
©2008-14 Overland Storage, Inc.
3 - Network Settings
42
