Table of Contents
Advertisement
5) Remove the cable [2] from the cable guide [1].
6) Remove the cable guide [1] in the arrow direction.
- 1 claw [2]
7) Remove the drive unit [1].
- 7 screws [2]
F-3-34
F-3-35
F-3-36
CAUTION: Point to note for assembling
- The link arm on the drive unit must be engaged with the protrusion on the
frame.
- 2 protrusions on the drive unit must be inserted into the holes on the frame.
3.1.8 Duplexing Drive Unit
3.1.8.1 Pre-procedure for removing duplex reverse drive
unit
1) Remove the right cover.(page 3-3)Reference[Removing right cover]
2) Remove the upper rear cover (left).(page 3-1)Reference[Removing up-
per rear cover (left)]
3) Remove the upper cover.(page 3-5)Reference[Removing upper cover]
4) Remove the left cover.(page 3-4)Reference[Removing left cover]
5) Remove the rear cover.(page 3-1)Reference[Removing rear cover]
6) Remove the lower rear cover.(page 3-1)Reference[Removing lower rear
cover]
7) Remove the rear cover lib unit.(page 3-1)Reference[Removing rear cov-
er lib unit]
3.1.8.2 Removing duplex reverse drive unit
1) Remove the cable [1] from the cable guide [2].
- 2 connectors [3]
Chapter 3
F-3-37
0021-4202
0021-4203
3-9
Hide quick links:
Advertisement
Table of Contents
