6) Remove the fixing motor unit [1].
- 3 screws [2]
CAUTION:
When you remove the fixing motor unit, do not lose the spring[1] at the rear
side.
CAUTION: Point to note for assembling
Be sure to assemble the unit in a way that the tip [1] of the spring and the
protruded parts [2] of the gear can be seen from the holes on the sheet metal.
F-3-140
F-3-141
MEMO:
When removing the fixing motor unit for removing other units, it is not
necessary to remove the fixing motor.
7) Remove the fixing motor [1].
- 3 screws [2]
8) Remove the gear [1] and pin [2] from the fixing motor.
[2]
[1]
Chapter 3
[1]
F-3-142
F-3-143
3-33