1.6.4 Points to note at disassembly/installation procedure
0021-1274
At disassembly/installation procedure, make sure to follow the instruction below to proceed.
1. Be sure to unplug the power code before disassembly/installation.
2. At installation, follow the procedure in the reverse order of disassembly unless otherwise instructed.
3. Be careful of the screw type (length, diameter) and corresponding part.
4. To check the electrical conductivity, washer equipped screw is used to attach the grounding wire and the varistor etc. When attaching them, be sure to use this
screw.
5. In principle, do not operate the machine without any part.
6. Be sure not to unscrew the screw with painting at disassembly.