Table of Contents
Advertisement
3.3.2 Adjusting of the footrests
L L L L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 30 mm above the ground.
* Adjusting length:
* Adjusting depth of the footplates:
The depth of the footplates can be adjusted according following instructions:
3.4
Battery connections
L L L L
CAUTION:
Risk of injury - Check that no tools or other conductive objects come
between the batteries poles, to avoid unintentionally current flows.
L L L L
CAUTION:
Risk of injury, damages - Do not work in a humid environment with
batteries and electronics.
The best way to disconnect the batteries:
1. Disconnect the main negative pole (-).
2. Disconnect the positive pole (+).
3. Disconnect the bridge.
Adjust the length of the footrests as follow:
1.
Loosen the screw
2.
Adjust the length of the footrest to a
comfortable length.
(3 positions possible: steps 35 mm →
holes outside tube, 3 positions possible:
steps 25 mm → inner tube)
3.
Tighten the screw
Check that the footrests are positioned
identically on both sides.
1. Loosen the two screws
footplate.
2. Move the footplate backwards or forwards
until the desired depth. (3 positions
possible: steps 20 mm)
Position 1: hole 2 and 4
Position 2: hole 3 and 5
Position 3: hole 4 and 6
3. Retighten the screws
Page 24
Express
2012-03
.
properly.
above the
properly.
Advertisement
Table of Contents
