Vermeiren Express Instruction Manual page 7

Brand
Address
Type
Model
Maximum occupant mass
Description
Batteries
Battery charger
Thermal fuse
Control unit
Minimum turning diameter
Reversing width
Diameter Rear wheels (number)
Tyre pressure, rear wheels **
Diameter front wheels (number)
Tyre pressure, front wheels **
Noise level
Storage and use temperature
Operating temperature of the
electronics
Storage and use humidity
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / ° .
* The theoretical driving distance will be reduced if the wheelchair is used frequently on slopes, rough
**Since different tyres may be used, please note the correct operating pressure of the tyres you use.
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-14: Wheelchairs - Part 14: Power and control systems for electrically powered
wheelchairs and scooters -- Requirements and test methods
EN 1021-1: Furniture - Assessment of the ignitability of upholstered furniture - Part 1 :
Ignition source smouldering cigarette
EN 1021-2: Furniture - Assessment of the ignitability of upholstered furniture - Part 2 :
Ignition source match flame equivalent
Vermeiren
Vermeirenplein 1/15, B-2920 Kalmthout
Electric wheelchair, Class A
Express
90 kg
Dimensions Minimum
2 x 12V
Exendis Impulse S (6A); IP21; Insulation class II
Shark / Electromagnetic braking system
30%
For other tyre diameters refer to your specialist dealer.
Table 1: Technical specifications
Page 5
Dimensions Maximum
AGM / 38 Ah / 20 hr
30 AMP
Approx. 1400 mm
Not applicable
12 1/2 x 2 1/4" air (2)
Max. 2,5 bar
8 x 1 3/4 mm air (2)
Max. 2,5 bar
< 65 dB (A)
-20 ° C to +40 ° C
-10 ° C to +40°C
ground or to climb curbs.
Express
2012-03
70%