Table of Contents
Advertisement
3.2
Manner of delivery
The electric wheelchair shall be delivered with:
•
Framework with arm supports, operator unit, rear and front wheels, seat and backrest
•
1 pair of footrests
•
2 x drive batteries + battery housing, 2 x drive motors
•
Impulse S charger (6A) + manual of Impulse S charger
•
Electronics
•
Tools
•
Operator unit + manual operator unit
•
Accessories
Before use, check that everything is included and that no products are damaged (example
by transport, ...). Please note that the basic configuration may differ in different European
countries. Contact your specialist dealer.
3.3
Possible adjustments
L L L L
WARNING:
Risk of injury - Turn the electric wheelchair off before you perform any
adjustments.
L L L L
WARNING:
Risk of injury - Never perform any adjustments while you are driving.
L L L L
WARNING:
Risk of injury - Adjustments may only performed by your specialist
dealer.
L L L L
WARNING:
Risk of injury - Make sure all screws, levers are firmly secured
before driving with your electric wheelchair.
L L L L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points or any moving parts.
3.3.1 Adjusting the arm supports
The width of the arm supports can be adjusted in horizontal direction.
1. Loosen the hexagon socket set screws
just under the seat frame.
2. Move the arm support in an horizontal
direction until the correct position, by
moving the rectangular tubes
over each other. (Range 60 mm: step less)
3. Retighten the screws
4. Repeat instructions above for the other arm
support.
Check that the arm supports are
positioned identically on both sides.
Page 23
Express
2012-03
and
properly.
Advertisement
Table of Contents
