Table of Contents
Advertisement
9.
Enter the Certificate Authority name (optional) in "CA Identifying Information", and then
click [Next].
10.
Leave "Data Storage Location" at its default, and then click [Next].
Internet Information Services and Certificate services are installed.
Creating the Server Certificate
After installing Internet Information Services (IIS) and Certificate services Windows components, create the
Server Certificate as follows:
1.
Start Internet Services Manager.
2.
Right-click [Default Web Site], and then click [Properties].
3.
On the "Directory Security" tab, click [Server Certificate].
Web Server Certificate Wizard starts.
4.
Click [Next].
5.
Select [Create a new certificate], and then click [Next].
6.
Select [Prepare the request now, but send it later], and then click [Next].
7.
Enter the required information according to the instructions given by Web Server Certificate
Wizard.
8.
Check the specified data, which appears as "Request File Summary", and then click [Next].
The server certificate is created.
Installing the Device Certificate (Certificate Issued by a Certificate Authority)
Install the device certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as the device certificate.
Enter the device certificate contents issued by the certificate authority.
1.
Open a Web browser.
2.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3.
Click [Login].
The network administrator can log on.
Enter the login user name and password.
Windows Authentication
59
2
Advertisement
Table of Contents
