Table of Contents
Advertisement
5. Enhanced Network Security
4.
Press [Permit SNMPv3 Communication].
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
5.
Press [Encryption Only].
5
6.
Press [OK].
7.
Press the [User Tools] key.
• To use Web Image Monitor for encrypting setting configuration data, you must first specify [Permit
SNMPv3 Communication] on the machine, and then configure the network administrator's [Encryption
Password] setting and specify the encryption key in Web Image Monitor. For details about specifying
[Encryption Password] in Web Image Monitor, see Web Image Monitor Help.
• If network administrator's [Encryption Password] setting is not specified, the data for transmission may
not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see "Registering the Administrator".
• p.33 "Logging on Using Administrator Authentication"
• p.35 "Logging off Using Administrator Authentication"
• p.28 "Registering the Administrator"
156
Advertisement
Table of Contents
