Table of Contents
Advertisement
2. Authentication and its Application
12.
Press [OK] twice.
13.
Press the [User Tools] key.
A confirmation message appears.
If you click [Yes], you will be automatically logged out.
2
• Under Windows Authentication, you can select whether or not to use secure sockets layer (SSL)
authentication.
• To automatically register user information under Windows authentication, we recommend that
communication between the machine and domain controller is encrypted by SSL.
• Under Windows Authentication, you do not have to create a server certificate unless you want to
automatically register user information.
• p.33 "Logging on Using Administrator Authentication"
• p.35 "Logging off Using Administrator Authentication"
• p.130 "Limiting Available Functions"
• p.41 "User Code Authentication"
Installing Internet Information Services (IIS) and Certificate services
Specify this setting if you want the machine to automatically obtain e-mail addresses registered in Active
Directory.
We recommended you install Internet Information Services (IIS) and Certificate services as the Windows
components.
Install the components, and then create the server certificate.
If they are not installed, install them as follows:
1.
Select [Add/Remove Programs] on the Control Panel.
2.
Select [Add/Remove Windows Components].
3.
Select the "Internet Information Services (IIS)" check box.
4.
Select the "Certificate Services" check box, and then click [Next].
5.
Installation of the selected Windows components starts, and a warning message appears.
6.
Click [Yes].
7.
Click [Next].
8.
Select the "Certificate Authority", and then click [Next].
On the displayed screen, "Enterprise root CA" is selected.
58
Advertisement
Table of Contents
