Table of Contents
Advertisement
Setting
IPsec Requirement Level
Authentication Method
PSK Text
Phase 1
HASH Algorithm
Phase 1
Encryption Algorithm
Phase 1
Diffie-Hellman Group
Phase 1
Validity Period
Description
Specify whether to only
transmit using IPsec, or to allow
cleartext transmission when
IPsec cannot be established.
(auto setting)
Specify the method for
authenticating transmission
partners.
(auto setting)
Specify the pre-shared key for
PSK authentication.
Specify the HASH algorithm to
be used in phase 1.
(auto setting)
Specify the encryption
algorithm to be used in phase
1.
(auto setting)
Select the Diffie-Hellman group
number used for IKE encryption
key generation.
(auto setting)
Specify the time period for
which the SA settings in phase
1 are valid.
Transmission Using IPsec
Setting Value
• Use When Possible
• Always Require
• PSK
• Certificate
If you specify PSK, you must
then set the PSK text (using
ASCII characters).
If you specify Certificate, the
certificate for IPsec must be
installed and specified before it
can be used.
Enter the pre-shared key
required for PSK
authentication.
• MD5
• SHA1
• DES
• 3DES
• 1
• 2
• 14
Set in seconds from 300 sec. (5
min.) to 172800 sec. (48 hrs.).
5
163
Advertisement
Table of Contents
