Gateway ALR 9250R User Manual page 83

Installing a 3.5-inch drive on the internal bracket
The internal mounting bracket is attached to the right wall of the drawer.
The drive mounted in this bracket is not accessable from the front of the
system during normal operation.
To Install a 3.5-inch Drive on the Internal Mounting Bracket
1. Turn the system power off.
Open the system as described in "System access" on page 2.
2.
Remove the mounting bracket from the drawer.
3.
4. Install the mounting bracket onto the drive with the screws supplied.
See the illustration Installing an Internal 3.5-inch Drive below.
Installing an Internal 3.5-inch Drive
Connect the data cable to the drive, making sure that pin 1 on both
5.
cable and drive are aligned.
Chapter 3: Components 69