Gateway ALR 9250R User Manual page 137

Other utilities provided with the system include the following:
•
BIOS Setup: described in Chapter 4, "BIOS Setup" on page 77. If
the system does not have a diskette drive, or the drive is disabled or
misconfigured, use Setup to enable it.
Or, you can move the CMOS jumper on the system board from the
default setting (Protect CMOS memory) to the Clear setting; doing
so allows most system configurations to boot. Then run the SSU to
configure the system.
•
Server Setup Utility (SSU): described in Chapter 5, "The Server
Setup Utility" on page 101. Use for extended system configuration
of onboard resources and expansion cards, viewing the system
event log (SEL), setting boot device priority, or setting system
security options.
Run the SSU from a set DOS-bootable diskettes. See "When to run
the SSU" on page 104 to make a set of SSU diskettes.
Data entered in the SSU overrides data entered in Setup.
Chapter 6: Other Utilities 123