Gateway ALR 9250R User Manual page 31

Using two screws, secure the cable retractor to the mounting holes on
2.
the rear of the system drawer. See the illustration Installing a Cable
Retractor below.
Cable Retractor
Dressing the cables
Placing the cables in the cable retractor and ensuring that none are pinched
or streched is the final step in the installation process.
Route the cable(s) from the rear of the system drawer over to the cable
1.
retractor, where it is mounted on the rear of the drawer.
Installing a Cable Retractor
To dress the system cables
Chapter 1: Getting Started 17