Gateway ALR 9250R User Manual page 32

18 Gateway ALR 9250R User's Guide
Secure the cables to the cable retractor with tie wraps. The cable
2.
retractor is designed with tie holes for tie wraps. See the illustration
Routing Cable on the Cable Retractor below.
Routing Cable on the Cable Retractor
Leave enough slack in the cables to let them flex when the drawer is
3.
pulled out.
4. Check the cables for tight spots while the drawer is being pulled
forward and pushed back into place. Check for stress points, especially
at the bends in the cable retractor and where the cable retractor is
mounted to the vertical mounting rail.
Route the cables to their destinations and secure with tie wraps as
5.
required.
6. If necessary, bundle and secure excess cable with a tie wrap to keep it
out of the way.
To power source