Calling A Voicebox From A Remote Terminal - Proximus Forum 500 User Manual

Calling a Voicebox from a Remote Terminal

If your system administrator has configured a voicebox with the authorisation
for remote access, you can also access and configure the box from a remote
terminal.
Note: In order to be able to call and query your voicebox from a SIP
terminal, the "Keypad as SIP-INFO message" function must be
activated on the SIP terminal. Please review the user guide of
the manufacturer on how to set this function.
Using the call number of the Forum Voicemail application...
(this call number is included in the incoming call distribution)
1. Select the MSN or the system call number to which your system adminis-
trator has assigned the internal call number of Forum Voicemail appli-
cation.
Wait until the connection to the communications system has been estab-
lished. You hear a message from your voicebox.
2. Then enter the internal call number of your voicebox – i.e. the call number
of the terminal which has been assigned to the voicebox. Confirm your
input by pressing
3. Enter the PIN of your voicebox.
4. Follow the instructions in the voice menu for all further operating steps.
Using the number of your telephone...
(the number of your telephone is included in the incoming call distribution;
you have diverted the telephone to your voicebox)
1. Dial the MSN or the system extension number at which you can reached
externally.
2. You hear the welcome text for callers to your voicebox.
3. Enter the PIN of your voicebox.
4. Follow the instructions in the voice menu for all further operating steps.
Note: For detailed information on the use and operation of the
Forum Voicemail application, please refer to the user guide for
the optional component "Forum Voicemail".
38
*
.
Remote-Controlled Functions