Even More Protection
Changing the User PIN
H * 9 9 *
Z
*
(old user PIN)
Z
*
(new user PIN)
Z
#
(new user PIN)
When your system is first commissioned, the user PIN is "0000". Code-
number procedures requiring a PIN should be unavailable to other users. For
this reason, you should change the PIN when you start operating your tele-
phone, and put the new number in a safe place. The user PIN can be up to six
characters long.
Please note: Make sure you do not lose your new PIN. Contact your system
administrator if you experience any problems.
You cannot change your user PIN on a SIP terminal with the code-number
procedure described here. You can do so, however, in the Configurator of the
Forum 500 / Forum 5000. To do so, the system administrator has to
authorise you to change your personal information. For more information,
please refer to the online help of the Forum 500 / Forum 5000.
Intercept
The call numbers of malicious callers can be stored in your network operator's
exchange (if this service has been implemented). This function works even if
the caller has already hung up!
Note:
The feature can only be activated on ISDN telephones.
33