Remote-Controlled Functions; Remote-Controlled Dialling (Call Through) - Proximus Forum 500 User Manual

Remote-Controlled Functions

The Forum 500 / Forum 5000 enables remote-controlled calls and remotely
programmable call forwarding. These features are set up by the system
administrator when he configures the system. To carry out these features the
system PIN is required. The system PIN is issued by the system administrator,
who has to change the default value "0000" to another value before it is
issued.
In addition, all the owners of voiceboxes can, with the corresponding authori-
sation, call their voiceboxes from external telephones. They can remotely
access and edit their messages as well as modify the central settings of their
voiceboxes. For this purpose the voicebox PIN has to be changed from the
default value ("0000") to another value.

Remote-Controlled Dialling (Call Through)

Without internal number assignment
Z
(reserved call no.)
Wait until the connection to the communications system has been estab-
lished. You hear a positive acknowledgement tone.
Z *
(system PIN)
Z
(external call no.)
With internal number assignment
Z
(reserved call no.)
Wait until the connection to the communications system has been estab-
lished. You hear a positive acknowledgement tone.
Z *
(system PIN)
Z
(external call no.)
You can call the Forum 500 / Forum 5000 from outside (from home, for
example), then dial an external number and continue telephoning with the
cost being charged to the Forum 500 / Forum 5000 connection. This way
you take advantage of different tariff zones, for example.
The system administrator must have set up a number (for remote control) in
the Forum 500 / Forum 5000 for this feature. In addition, the number
reserved in the Forum 500 / Forum 5000 can also be assigned an internal
call number, via which the dialling is to be performed. In the case of remote-
controlled dialling, there is no check on authorisation.
36
(external access code, e.g.
#
(external access code, e.g.
* Z
(internal call no.)
Remote-Controlled Functions
0
)
0
)
#